People all across the globe have got their hands on Netgear wireless routers to extend the existing network range in their homes. However, despite performing Netgear router setup using the Netgear Nighthawk router login credentials properly, they have been facing the Netgear router not working issue.
In case you are also a victim of the same issue, then you have landed on the right article. As you continue reading, you will come across various troubleshooting techniques following which you will be able to make your networking device up and running in a matter of minutes. With that said, waste no more time and give this guide a quick read.
[Resolved] Netgear Router Not Working Issue
1. Reboot the Netgear Router
You can begin troubleshooting the issue by doing the most obvious thing, i.e. rebooting the Netgear wireless router. Now, the question is how to reboot or restart the router. Well, the process is quite easy to execute. You just need to walk through the step-by-step guidelines given in the following paragraph.
Turn off your Netgear router. Unplug it from the wall socket that it is connected to. Count from one to ten. Plug the router back into its wall socket. At last, turn on the router. As soon as the LED located on your networking device blinks, check if you are able to put an end to the Netgear router not working issue. In case, you are not, continue reading.
2. Check the Router-Modem Link
Another reason why you are experiencing the Netgear router not working issue is because the connection which you have established between the router and the modem is loose. It might be because the cable used to connect them is worn out. To eliminate this as one of the reasons behind the issue at hand, you need to buy a new cable.
When you have brought a new cable home, use it to connect the networking devices. For that, you have to plug one end of the cable into the router and another into the modem. Make sure that the connection you are making is finger-tight. Apart from this, ensure that the ports located on the router, as well as the modem, are not damaged.
3. Bring the WiFi Devices Near
In case you are not able to make your networking device work, then it is because you have kept it far away from the existing modem. Therefore, you need to bring them close to each other. That can be done if you unplug your router from its existing wall socket and plug it into the one located in the same room where the modem is kept.
While you are relocating your router, make sure that you are not keeping it too close to the modem. We are suggesting you this because too less of a distance can cause their signals to clash thereby leading you to face further technical issues in the future. Some of them include Netgear router red light issue, routerlogin not working issue, etc.
4. Setup the Netgear Router Again
Despite following all the troubleshooting techniques mentioned above, if you are still facing the Netgear router not working issue, then it means that you did not set up your wireless device properly after all. But, worry not. You still have the time to take things into your hands. With that said, consider setting up your networking device again.
There are three methods in total that can be used to reconfigure your device. In the first method, you need to press the WPS button on the Netgear router and the modem. In the second method, you need to put the Nighthawk application to use. In the third method, you have got to access the web user interface of your device.
Troubleshooting the Netgear router not working issue is not rocket science. However, many people consider it to be one. We hope that after taking a walk through the steps given above, you will be able to get your networking device back on its feet. On the off chance, you are still facing the same issue, then it is suggested that you get your device replaced.
What do you think of this article? Did you like reading it? Nodding your head in yes or is that a no that we see? Whatever your answer may be, consider sharing it with your fellow readers. The same can easily be done if you put the comment section to use. Fret not. Your fellow readers will like this little effort made by you.